road marking paint; It is the material applied to the road surface to inform the rules to be followed. They are usually applied with road marking machines used for road marking. It is also used to mark areas in facilities such as parking lots, sidewalks, parking lots and factories used by vehicles.
Single Component Road Marking Paints
Single component based road marking paint; Methyl methacrylate paint has a high strength and an elastic structure. Thanks to this elasticity, it moves with the ground, and due to its adaptation to these movements in its structure, there is no cracking or breakage on the paint surface.
Two Component Road Marking Paints
It is used on concrete and asphalt surfaces, pedestrian crossings, stop lines and speed limiter lines where traffic safety is important. It is applied in 2-4mm thickness. It provides good performance and durability in heavy traffic and pedestrian crossings. It is resistant to abrasion, friction and UV rays. Provides long-lasting use. It is a two component cold applied road marking paint. It dries quickly after application. In this way, the passage of pedestrians and vehicles is ensured in a short time. Different forms of application are also available, such as paving, spreading and profile skipping. Sprinkle glass beads on it. This ensures nighttime visibility.
Three Component Road Marking Paints
Three-component road paint is a road marking paint that hardens with a chemical reaction formed as a result of mixing its components. Three component road marking paint is applied to the surface to be applied with a cold and pressurized machine. Line thickness 1 mm. It is recommended to be used in places where it should be under (Airport runways, etc.). Highways are produced in accordance with international road and TSE standards. Three-component road marking paint can be produced in desired colors upon request.
Thermoplastic Road Marking Paints
Thermoplastic road marking paint is a product that can be shaped by changing phase with heat, can perform this change more than once, and does not lose its properties in the meantime, and reflects the light with its special additives. It is formed by mixing the raw materials that make up the thermoplastic in a certain ratio so that a homogeneous distribution is ensured. The transformation of powdered material into plastic structure is provided by heat.
Glass Beads
glass bead; road paints, thermoplastic, cold, double component etc. It is defined as spilled materials on line paints. It reflects a beam of light from a vehicle's headlights back towards the driver. Glass beads are produced in a transparent, clean, colorless, smooth surface and spherical form. No other material should be added to the glass bead for any reason. Glass beads are resistant to water, hydrochloric acid, calcium chloride, sodium sulfide. The particle size distribution of the glass beads conforms to the TS EN 1423/April 2003 standard.
Bicycle Road Paints
It is a painting product used for bike paths, asphalt coating of floors, coloring, adding lines and logos. It is resistant to UV rays. It adheres very well to the asphalt surface on which it is applied, has high mechanical strength and does not crack.
Complementary Products (Hardener - Road Marking Paint Thinner - Cleaning Thinner)
Hardener; It is used as a hardener in two component road marking paints.
Road marking paint thinner; Tinsol" is a cold road marking paint thinner. It is a cleaning thinner for cold road marking paint. Cleaning the machines after application is very important for their longevity. At this point, we recommend cleaning thinner to meet the need for cellulosic thinner with very strong solvent properties. It will be more effective to use it only for cleaning, as it may cause negative consequences such as flowing.
Cleaning thinner; It is a cleaning thinner for cold road marking paint. Cleaning the machines after application is very important for their longevity. At this point, we recommend cleaning thinner in order to meet the need for cellulosic thinner, which has very strong solvent properties. If it is used for thinning, it will be more effective if it is used only for cleaning, since it may cause negative consequences such as bleeding in the paint.